This video explains the importance of safety when pulling an 80ft. Pole trailer loaded.  This is a retractable trailer with electrical brakes that do not work when the trailer is disconnected.  The trailer is equipped with a safety break away device.

This video explains that PM-A of compressors is important because in order to efficiently complete job tasks, an air compressor needs to run properly.  Jack hammers are used on different jobs both in winter and summer.

This video explains that good operators check oil, water, hydraulic oils and tires as well as a daily walk around inspection.  It stresses safety of the loader and its practices.

This video will demonstrate the proper ways to safely maintain and transport backhoe/loaders.

This video discusses the importance of operation and preventative maintenance of bulldozers and motor graders.  A five minute effective inspection is explained and the tilt bed trailers.

This video explains the different types of cranes and safe and efficient operations.  This video is in two parts: 1. Preventative maintenance of two different cranes.  2. Operation.

This video explains proper transportation of the crawler excavator and  proper maintenance because poor maintenance will shorten the life of your machine.

This video covers safety and safe operation of crawler excavators and the proper terms for the controls.  It will also help operators to understand and perform the proper walk around inspection for this equipment.

This video explains to the new operator a variety of safe operating techniques to allow them to become a safe and efficient crawler excavator operator.

This video is in four parts:  Part 1 - daily checks on start up and shut down.  Parts 2, 3 & 4 - shifting, driving, dumping, tailgate spreading, working with pups, pavers, and other equipment.  The final program explains the PM-A.

This video explains how the Utah DOT protected the investment of their equipment by educating their employees on the equipment.

This video is in two parts:  1. Operational techniques  2. Preventative maintenance procedures.  This tape explains that anyone can drive a forklift, but you must understand it's capabilities before you can successfully operate it. 

This video stresses the importance of running the loader safely and properly because it can be an important asset to your road construction company.

This video explains that every sander is different and should be calibrated in full before the snow.  Calibration consists of: 1. Loading sander   2. Setting gate opening properly  3. Discharge salt at various chain settings  4. Weigh the amounts of salt discharged. 

The Motor grader is the essential tool in maintaining roads.  Today's Motor grader has been designed to make these jobs easier and faster than ever before.  But the Motor grader is only part of the story, the key factor is the Motor grader operator.  With a professional Motor grader operator, the video will demonstrate how to get more out of the Motor grader.

This video overviews the maintenance requirements of equipment:   1. Diesel engines   2. Automatic & manual transmissions   3. Electrical & electronic systems   4. Gasoline engines   5. Drive trains   6. Hydraulic systems   7. Brake systems   8. Air-conditioning systems   9. Preventative maintenance techniques.

This video explains that the purpose of today's electronic and electric systems is to store and generate power, ignite fuel, and  power electrical and electronic systems.  It also explains their functions with the battery and charging systems.

This video discusses the internal combustion of gasoline engines and its basic systems and fundamentals.  Then gives an overview of the operational principles of gasoline motors.

In this video, Landa presented their pressure washers and explained the types of oils and fuels it will use, safety tips and operational tips.

This video explains the  loader is the hardest worked piece of equipment in road maintenance and is in two parts:  1. Pre-trip inspection, servicing leader for days work, start-up procedure, leader controls, and shut down procedure.
2. Maneuvering the loader and its operations.

This video is in three parts.  1. Basic information about the blade - start-up and shut down.  2. Blade positions and maneuvering.  3. Operating techniques in actual situations.

This tape explains how to mix dry aggregate properly with a blade and stresses the importance of having a clean floor and plenty of room for mixing.

Three areas of the Motor Grader are covered: Part 1 - basic information, start-up and shutdown procedures,  Part 2 - blade positions and maneuvering,  Part 3 - operating techniques in actual working environments.

Explanation to operators how to operate self-propelled brooms safely and efficiently.

This video is designed to instruct the scraper operator how to do his/her job better.  It will also stress the importance of properly doing a walk around inspection, checking the elevator system , checking cutting edge and teeth, and knowing the machines capabilities.

This video discusses different operating techniques and how important reading an operation manual is before operating a grader.

This video discusses different operational techniques and tips to make an operator better at their job such as pre-trip inspection (check all fluids), trenching, back filling, loading trucks.

This video reviews the importance of daily maintenance to asphalt distributors to keep them functioning properly.

This video explains that different agencies have different PM-A's, but it is the operators responsibility not to overlook manufactures required PM-A.  This video discusses pre-start checks, warm-up, daily operation, and shut down.

This video will demonstrate to an operator how to properly do a "walk" around inspection by checking all fluids, checking for traces of wearness, checking the stick and boom; "Experience teaches an operator to keep learning."

This video will help the operator learn and understand track-type loaders and stress the importance of knowing its limitations and always staying alert.

This video explains that a roller working improperly can delay shut down of a road construction job.  Each agency has it's own set of maintenance guidelines and the responsibility not to overlook manufactures guidelines for proper preventative maintenance.

This video instructs new operators on operation techniques of the track-type tractors, proper walk around inspection, startup procedures, operation of controls, and shut down procedures.

This video explains which hand tools to use to properly patch potholes and the importance of safety.

This video explains there are two types of pneumatic rollers and their back tires are off set from the front in order to compensate for the rollers pass.  The tape also discusses daily check list, start up and warm up, basic operation, rolling techniques, shutdown, and P.M.A. - Preventative Maintenance Assigned.

This video explains that the push truck striper has neutral, forward and reverse gears and  will hook up to the back of 4R300 hydrostatic cart.  It is designed for one operator and after warm up the idle speed will be set to full to remove stripes.

This video explains daily maintenance and check lists for steel wheel and pneumatic rollers.

This video is in three parts.: Part 1 explains daily checks for inspection and service of the tractor and mower.  Part 2 explains operation from start-up to shut down.  Part 3 explains P.M.A. - scheduled maintenance for the equipment.

This video explains the operation and maintenance of these forklifts. A proper walk around inspection can prevent injury to the operator or possibly death.

This video discusses the proper and safe ways to operate a skid and steer piece of equipment (Bobcat).  Always read operators manual prior to operation.

This video explains that with  4-6 ton steel wheel rollers safety is the most important thing.  The video is in two parts:  Part 1 -   daily check list, start-up, hook-up, towing, basic operation, rolling techniques, and shut down.  Part 2 - covers the P.M.A.

This video introduces today's modern motor grader and the controls in the cab that are involved with lifting, pitching, floating, cutting , and side shifting.

This video discusses the walk around inspection, operation of the truck, start-up, and shut down.  A ten wheel dump truck can haul material, plow snow, and distribute chips into a spreader box during a resurfacing project.

This video explains the two types of distributors (self-propelled and pulled units) and the importance of proper walk around inspections as it is the operators job to check the vehicle daily for maintenance defects.  Look, listen, and feel for potential safety problems.

This video describes this sweeper as an air cooled Wisconsin motor bolted on a steel frame with a 7'-8' wide brush that will cover a lot of roadway if ran properly.  Always, perform a walk around inspection, check engine, grease if needed, check brush, and tension/alignment of chain.  The operating portion shows start-up & hook-up, sweeping, and shutdown.

This video covers safe equipment transport reviews the proper way to load equipment and chain it down to the trailer.

This video discusses the TL 100 and the crawler trencher and different techniques of operation.    Always do your proper walk around inspection prior to operation and never wear loose fitting clothing.

This video explains controlling weed growth by either cutting or killing it.  This video is in 2 parts:  1. Weed sprayer and its major components.  2. Daily PM-A and operating techniques.

In eight steps this video will cover:  1. Safety  2. Walk around inspections  3. Operators compartment - startup  4. Setting the VCTC  5. Loading the bucket  6. Truck loading  7. Load and carry   8. Shutting the machine down.

These trucks perform 3 major functions: lifting objects, digging holes, and carrying load.  These operations depend on the boom which can be moved up and down and side to side.  Riggers should be placed on the ground before work is started.